saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Front Cross-Member Bushing > < Front Cross-Member|Specifications|Page 6801
Page 7
background image

21. Tighten the bolts securing the gearbox torque arm to the subframe.

Tightening torque 25 Nm (20 ft. lbs.). 

22. Plug in the front heated oxygen sensor's connector and that of the rear heated oxygen sensor, if fitted, and secure the cable suitable places.
23. Refit the cover over the intake manifold.
24. Check the toe-in and adjust as necessary.

Front Cross-Member Bushing > < Front Cross-Member|Specifications|Page 6801