9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
4. Refit the front seat.
5. After the TWICE control module is replaced, it must be programmed into the car.
Programming
NOTE: All car keys must be programmed at the same time
IMPORTANT: The transponders and remote controls that are not available during programming will be rendered unusable.
1. Connect the diagnostic tool
2. Remove the antenna unit for immobilization by turning it clockwise. Do not disconnect the switch. Place the antenna unit on the side of the
ignition switch.
NOTE: The antenna unit should not be removed at low temperatures due to the risk of crack formation.
3. Hold the accompanying transponder over the hole in the antenna unit. Switch the ignition to the ON position. Hold the transponder in the same
position for a few seconds.