saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 12897 > < Front Subframe|Service and Repair|Page 12893
Page 1
background image

Rear Subframe: Service and Repair

Nut Piece, Rear Subframe

Removing

1. Remove the mats to expose the floor.
2. Use a 35 mm hole saw to cut out a hole in the marking.
3. If necessary, remove the bolt from underneath.
4. Use a screwdriver to snap the old nut piece out of the holder. Use a pair of pliers or a piece of bent wire to lift out the nut piece.

Fitting

Rear Subframe|Service and Repair|Page 12897 > < Front Subframe|Service and Repair|Page 12893