saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Centre Console|Page 12970 > < Cargo Cover|Service and Repair|Page 12965
Page 1
background image

Console: Service and Repair
Centre Console

Centre Console

To remove

1. Manual gearbox:

Lift up the gear lever gaiter.

Automatic transmission:
Remove the edging using 82 93 474 Removal tool.

2. Remove the compartment or ashtray with holder using a screwdriver and 82 93 474 Removal tool.
3. Remove the gear lever cover, 2 screws.
4. Unplug the connector for the central locking system switch.
5. Lift up the gear lever gaiter and undo the connectors for the seat heating, seat ventilation and cigarette lighter switches.

IMPORTANT:  Mark the connectors to avoid incorrect reconnection.

6. Remove the rear section of the centre console by removing the screw on the top. Then lift straight up and unplug the connector.

Centre Console|Page 12970 > < Cargo Cover|Service and Repair|Page 12965