saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Centre Console|Page 12978 > < Centre Console|Page 12976
Page 1
background image

Console: Service and Repair
Roof Console, 4D

Roof Console, 4D

To remove

WARNING:  Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion
should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.

1. Remove the sun visors and their mountings (A).

2. Remove the light lens (B) from the cover by carefully prizing with a screwdriver in the clip recess of the light lens.

NOTE:
-

Exercise care, as the light lens could crack if incorrectly removed.

-

Take care not to scratch the cover.

3. Unscrew the roof console's cover (C).
4. Unplug any connectors for microphone and interior temperature sensor and lift away the cover (B).

Unplug and separate the grey 10-pin connector.

5. Remove the interior rearview mirror, 3 screws.
6. Remove the A-pillar trims (fastened with clips) (D).
7. Remove all courtesy handles above the doors (E).

Centre Console|Page 12978 > < Centre Console|Page 12976