9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-3239002.png)
NOTE: The following description applies to left-hand drive cars.
The lock motor in the driver's door has an integrated electric motor with three microswitches.
On the electric motor there is a cam, which regulates the position of the microswitch. The microswitch is connected to the TWICE control module from
pins 9 and 10 to pins 42 and 22.
1. When the car is not locked, the microswitch is in position pin 10. When the electric motor is supplied with current from pin 22 on the TWICE
control module and the central locking system is locked, the microswitch position is changed by the movement of the electric motor to pin 9.
2. To unlock the car, the electric motor receives current from pin 26 on the TWICE control module and the motion of the electric motor changes the
position of the microswitch from pin 9 to pin 10.
3. Before activating TSL, the microswitch is in position pin 9. When the electric motor is supplied with current from pin 42 on the TWICE control
module and the central locking system activates TSL, the motor changes the position of the microswitch to pin 10. At the same time, pin 10 on the
microswitch is supplied with current from pin 22 on the TWICE control module to ensure that the electric motor reaches its end position.
