saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Lock Motor, Driver's Door|Page 13181 > < Lock Motor, Driver's Door|Page 13179
Page 6
background image

The microswitch of the lock cylinder is connected to pins 56 and 33 of the TWICE control module. The microswitch is grounded through lock motor pin
1 in the lock unit.

1. When the key is turned to lock the door, the pull rod operates the microswitch which grounds pin 7 on the lock unit, whereby pin 56 on the

TWICE control module is grounded.

2. When the key is turned to unlock the door, the pull rod operates the microswitch which grounds pin 3 on the lock unit, whereby pin 33 on the

TWICE control module is grounded.

The lock button microswitch is connected to pin 55 on the TWICE control module and grounded through pin 1 on the lock unit.

When in unlocked position, the microswitch grounds pin 55 of the TWICE control module.

This input is not used by the TWICE control module at present.

Lock Motor, Driver's Door|Page 13181 > < Lock Motor, Driver's Door|Page 13179