saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Master Cylinder|Page 8172 > < Master Cylinder|Page 8170
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Brake fluid reservoir, LHD

To remove
1. Cover the wings.
2. Unplug the connector from the level sensor in the brake fluid reservoir.

3. Remove the battery cover and the battery.
4. V6 diesel engine: Remove the turbocharger heat shield.
5. Remove the main fuse box and place it to one side.
6. Remove the cap on the brake fluid reservoir and drain the reservoir using 88 19 096 Bleeding equipment.

7. Place paper towelling or a rag under the master cylinder to collect any spilt fluid.
8. Manual gearbox: Disconnect the clutch fluid hose from the brake fluid reservoir.

Master Cylinder|Page 8172 > < Master Cylinder|Page 8170