saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3998 > < Diagram Information and Instructions|Page 3996
Page 3
background image

1D

1.D. Press in the catch on the wire clamp and tip the wire forward.

Plug in the connector and lock it by raising the wire clamp.

NOTE:  Make sure the wire clamp is locked in the correct position, to ensure good contact in the connector.

1E

1.E.

Raise the catch to release the connector. 
Make sure the connector is securely locked when plugged back in.

Diagram Information and Instructions|Page 3998 > < Diagram Information and Instructions|Page 3996