9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-901018.png)
7. Fit the timing chain safety guard.
8. Fit the balancer shaft chain upper guide.
Tightening torque: 10 Nm (7 ft. lbs.)
9. Check that the chain tensioner plunger is correctly positioned. If the plunger can be depressed fully it must be turned 180°.
10. Turn the plunger on the balancer shaft chain tensioner 90—, press it in and turn it back 90—. Lock the tensioner in position by inserting a
paperclip or similar into the hole on the top of the tensioner.
11. Fit the chain tensioner and the moving chain guide.
Tightening torque: 10 Nm (7 ft. lbs.)
Warning: Ii is very important for the function that the correct tightening torque is used when fitting.
12. Fit the balancer shaft chain pinion on the crankshaft.
13. Align the marks on the balancer shafts with the marks on the top of each bearing housing.
14. Fit the chain to the sprocket and fit this along with the idler sprocket.
Tightening torque: 25 Nm (18 ft. lbs.)
15. Check the setting of the balancer shafts and loosen the chain tensioner. Counterhold with the moving guide, remove the wire clip from the chain
