9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-978015.png)
71. Remove the balancer shaft pinions. Use the old balancer shaft chain as counterhold when removing by placing the chain around the crankshaft
sprocket and balancer shaft pinion. Hold together with pliers.
72. Fit the new pinions with the chain as counterhold.
Tightening torque: 25 Nm (18 ft. lbs.)
Important: The pinion with the smaller thrust ring marked INL must be fitted on the inlet side and the pinion with the larger thrust ring marked
EXH must be fitted on the exhaust side.
