9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-2407021.png)
5.
Fit the new heat exchanger housing onto the evaporator casing and fit the 4 screws and the 2 clips to the front and right-hand side of the heat
exchanger housing.
Tightening torque 1.4 Nm (1 lbf-ft)
6.
Fit the screw and the 2 clips to the left-hand side of the heat exchanger housing.
7.
Fit the collar to the air outlet.
8.
Fit new 0-rings greased with synthetic vaseline, part no. 30 15 286, on the heat exchanger pipes and fit the pipes to the heat exchanger. Exercise
care that the 0- rings are not damaged.
