saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9417 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9415
Page 22
background image

Tightening torque 3.5 Nm (2.6 lbf-ft).

9.

Remove the stepping motor from the old air distributor housing and remove the control rod from its clip.

Note

The old control rod shall not be used with fitting.

10.

Press down the control rod to its lowest position.

11.

Locate the air distributor housing into its position and fit the screws.

Tightening torque 1.4 Nm (1 lbf-ft.)

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9417 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9415