saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9420 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9418
Page 25
background image

Stepping motor distribution, blue tape

Blend Stepping motor, left-hand side, brown tape

Blend Stepping motor, right-hand side, red tape

20.

Up to VIN 43003168 inclusive: Carefully make holes using the temperature sensors and position them. Secure the wiring harness with cable ties.

From VIN 43003169 inclusive: Remove the plug on the air duct. Fit the temperature sensors by twisting and pressing them in. Secure the wiring
harness with cable ties.

21.

Fit the heating and ventilation unit as described in WIS. See WIS 9-5 Body - Heating and ventilation, A/C - Adjustment/Replacement - Climate
control unit.

22.

Replace and lubricate the 0-rings on the A/C pipes from the expansion valve using synthetic vaseline, part no. 30 15 286. Exercise care that the

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9420 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 9418