saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 9616 > < Procedures|Page 9614
Page 11
background image

21. Insert the cover over the bulkhead partition space from the rear, against the windscreen. Hold the wire to the bonnet to one side and then place it in

its groove.

22. Fit the rubber strip on the front edge of the bulkhead, 2 clips.
23. Fit the rubber seals on the wiper spindles.
24. Fit the wiper arms.

Procedures|Page 9616 > < Procedures|Page 9614