saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Cabin Air Filter > < Procedures|Page 9623
Page 9
background image

16. Insert the cover over the bulkhead partition space from the rear, against the windscreen. Hold the wire to the bonnet to one side and then place it in

its groove.

NOTE:  Take care when remove the clips.

17. Fit the rubber strip on the front edge of the bulkhead, 2 clips.
18. Fit the rubber seals on the wiper spindles.
19. Fit the wiper arms.

Cabin Air Filter > < Procedures|Page 9623