9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
2. Fit the belt pulley and attach the circlip.
3. Insert the shims in the driver and fit it on the shaft. Tighten the bolt.
Tightening torque: 13 Nm (9 lbf ft)
4. Check the clearance between the driver and the belt pulley with a feeler gauge.
NOTE: The feeler gauge must be angled to measure the clearance.
The clearance should be 0.5 ± 0.15 mm.
If necessary, adjust the clearance by changing the shims on the compressor shaft.
5. Place the multigroove V-belt on the belt pulley.
Check that the multigroove V-belt is located correctly.