9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-2500002.png)
6. Withdraw the pins in question from the connector (B).
7. Pull out the sensor (C).
NOTE: The leads in question are taped to a wiring harness. Facilitate removal by clipping the appropriate leads in a suitable spot and wire with
new leads during fitting.
To fit
1. Insert new cables (B).
2. Refit the connector in the upper bracket for the heating and ventilation unit (A).
3. Refit the sensor to the lower part of the panel (A).
