saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 10025 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 10023
Page 16
background image

9.

Up to VIN 43003168 inclusive: Make a note and mark which connector is connected to which stepping motor. In some cases the cables are
already marked, see To fit. Mark up on which side each temperature sensor is fitted. The temperature sensors must not be mixed up when fitting.

From VIN 43003169 inclusive: Make a note and mark which connector is connected to which stepping motor. In some cases the cables are already
marked, see To fit. Mark up on which side each temperature sensor is located. The temperature sensors are removed by twisting them and they
must not be mixed up when fitting.

10.

Unplug the wiring harness and cut the cable ties. Remove the wiring harness.

Note

Up to VIN 43003168 inclusive: Take care that the catches holding the temperature sensors do not break.

11.

Remove the 4 screws from the cover and remove the cover.

12.

Carefully remove the upper cam disc.

A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 10025 > < A/C - L/H or R/H Cabin Temperature Can't Be Changed|Page 10023