saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module|Page 10166 > < Control Module|Page 10164
Page 7
background image

Power Ground

The ACC unit is power grounded on pin 1 from G41P.

Sensor Ground

All sensors are grounded from separate control module outputs that internally have a common ground via a resistor.

Reference Ground

The fan control unit's reference ground is obtained from pin 35.

Diagnostics

If ground is not present, the display will not light up when the ignition is turned on.

If the sensor ground is shorted to 5 V or B+, diagnostic trouble code B2945 is generated and 23 is displayed instead of right-hand temperature when
calibrating.

Control Module|Page 10166 > < Control Module|Page 10164