saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module|Page 10168 > < Control Module|Page 10166
Page 2
background image

-

air recirculation off

-

full display

If a lower value than 15 °C, alternatively 58 °F is selected, LO is shown (passenger cannot select LO if the driver has not) and the system is set
according to the following:

-

fan current MAX

-

A/C on (ECON off)

-

air distribution in panel position

-

air-mixing in full cold position for side in question, 0% is displayed on the diagnostics tool.

-

air recirculation on

-

full display

Adjustment

The ACC unit can be adjusted with the diagnostics tool to:

-

raise or lower the temperature in the LH or RH zone compared to that set on the display.

-

regulate the climate system as a single zone system, the temperature buttons then change both temperatures on the display simultaneously

-

regulate the climate system as a 1-zone system only when the front seat is not occupied

-

temporarily increase fan speed more than normal if the driver changes the selected temperature

NOTE:  The cabin temperature is always adjusted so that the perceived temperature corresponds with the one set. This means that a thermometer
normally will show another value than the one set.

Defrost

The system is set as follows:

-

fan current 18 A

-

A/C on (ECON off)

-

air distribution in defrost position, 100% is shown on the diagnostics tool

-

normal temperature regulation

-

air recirculation off

-

heated rear window on

-

full display

-

AUTO goes out

Defrost/Floor

Control Module|Page 10168 > < Control Module|Page 10166