saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module|Page 10171 > < Control Module|Page 10169
Page 5
background image

This button switches on and off the manual air recirculation. To return to automatic the AUTO button must be pressed. Note that AUTO is displayed
even when manual recirculation is selected.

The function can be user-programmed as soon as a manual selection has been made. When air recirculation is switched on, the system is set as follows:

-

air recirculation on

-

button symbols appear on the display

Electrically heated rear window

This button switches on and off the heated rear window. Rear window heating cannot be switched on manually until the engine has been started.

The length of time the heating is on is determined by the outside temperature. At +5 °C it is 5 minutes and at lower temperatures the time is increased to
max 10 minutes when the outside temperature is lower than -10 °C.

If automatic rear window heating is selected with extended user-programming, the maximum time is 5 instead of 10 minutes.

The function can be user-programmed as soon as a manual selection has been made. When rear window heating is switched on, the system is set as
follows:

-

electrically heated rear window on

-

button symbols appear on the display

Fan

Control Module|Page 10171 > < Control Module|Page 10169