saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Components|Page 14593 > < Main Components|Page 14591
Page 39
background image

Outdoor temperature

The current outside temperature will be shown in the SID display if the TEMP function is selected or the temperature warning function is activated. The
outside temperature will then be shown automatically. Information on the outside temperature comes from the sensor in the front spoiler.

A temperature warning function is built into SID and works as follows:

If the temperature falls from a higher temperature to +3 degree C (37 degree F) or rises from a lower temperature to -3 degree C (26 degree F), the
outside temperature is automatically shown on the display irrespective of which display SID is set to.

This display remains until another function is selected.

To avoid the effect of radiant heat, the temperature sensor reading is updated differently depending on whether the outdoor temperature is rising or
falling and it is speed-dependent.

The reading is updated as follows:

-

+1 degree C (1.8 degree F) every 6 minutes at speeds below 30 km/h.

-

+1 degree C (1.8 degree F) every 30 seconds at speeds above 30 km/h.

-

-1 degree C (1.8 degree F) every 2.5 seconds.

Main Components|Page 14593 > < Main Components|Page 14591