saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Components|Page 14594 > < Main Components|Page 14592
Page 40
background image

If the engine is switched off, the current outside temperature value is shown in SID. SID also calculates the time for which the engine has been switched
off. When the ignition is turned on again, SID shows the stored outside temperature value from ignition OFF if the time for which the engine has been
switched off is:

-

less than 12 minutes.

If the engine has been turned off for more than 12 minutes, the current outside temperature reading from the sensor is shown.

Information on the outdoor temperature is sent as bus information, unit degree C/degree F (-40 to +50 degree C), (-40 to 122 degree F).

DTE (distance on remaining fuel).

To calculate how long the car will run with the fuel quantity left in the tank, SID uses information on:

-

Fuel level, unit litres (bus information from MIU).

-

Odometer reading, unit km (bus information from MIU).

Main Components|Page 14594 > < Main Components|Page 14592