saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 2969 > < Procedures|Page 2967
Page 6
background image

Replace the hose clamp and connect the connectors to the radiator fans on the fan cowling.

Cars With Automatic Transmission:
Connect the oil cooler hose on the bottom of the fan cowling.

9. Mount the by-pass pipe including the valve.

10. Fit the heat shield to the manifold.
11. Fit the inlet hose and mass air flow sensor.
12. Evacuate the A/C system and fill with R134a refrigerant.

Compressor Low-Pressure Pipe

Compressor Low-Pressure Pipe (4-Cyl)

The compressor's low-pressure pipe runs from the expansion valve via a joint to the compressor.

IMPORTANT

Be careful not to contaminate the expansion valve.

To remove

1. Place the car on a lift.

Procedures|Page 2969 > < Procedures|Page 2967