9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-808002.png)
7. Place a receptacle under the car and remove the return hose from the steering servo.
Re-assembly
1. Connect the line to the steering gear.
Note: Use new seals with the banjo connector.
Tightening torque 30 Nm (22 ft. lbs.)
2. Fasten the return line to the delivery line with two cable ties.
3. Fit the clamp holding the line to the steering gear.
4. Lower the car and fit a cable tie around the line and the air-conditioning low pressure pipe.
5. Connect and fasten the line to the power steering fluid reservoir. Ensure that the white line on the line is aligned with the arrow on the reservoir.
6. Fit the steering servo reservoir.
