9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
3. To check the clamping force, use a test cable with the correct size pins (from set 86 12 731).
NOTE: A test cable with too large pins will damage the sleeves in the connector.
-
Insert the test cable pin into the connector to check the pin clamping force. Poor clamping force can cause intermittent contact.
-
Check also that the pin is aligned with the other pins in the connector. A pin that is recessed (pushed out) can cause intermittent breaks.
4. Check the wiring and connections for breaks.
5. Check the wiring harness, connectors and ground connections.
Testing For Open/Short Circuits
Testing For Open/Short Circuits
General