9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
Oxygen Sensor: Service and Repair
Preheated Oxygen Sensor 2. OBDII
Preheated Oxygen Sensor 2. OBDII
To remove
WARNING:
Warm components:
1. Unplug the connector.
2. Remove the oxygen sensor connector from the holder.
3. Cut the oxygen sensor cable fastening.
4. Raise the car.
5. Check the run of the cable and then lead the cable down.
6. Remove the cable from its floor fixing.
IMPORTANT:
-
The cables must not be twisted. Twisted cables exposed to vibration can break.
-
The oxygen sensor is sensitive to impacts and jolting and must be handled with care.