saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Throttle Body|Specifications|Page 6493 > < Throttle Body|Specifications|Page 6491
Page 4
background image

2. Fit the hose under the limp home solenoid and fit the clip.
3. Tighten the 3 throttle body retaining screws.

4. Spray the throttle body 10-pin connector with Kontakt 61 (part no. 30 04 520) and plug it in.
5. Spray the limp-home solenoid connector with Kontakt 61 (part no. 30 04 520). Plug in the connector and fit the rubber seal.
6. Fasten the accelerator pedal wire to the throttle body pedal arm.
7. Fit the lower vacuum hose.

Throttle Body|Specifications|Page 6493 > < Throttle Body|Specifications|Page 6491