saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Ignition System > < Wastegate Solenoid|Specifications|Page 6652
Page 2
background image

1. Attach the valve to the metal bracket and then to the expanding pin.
2. Connect the hoses to the control valve. Make sure the markings on the hoses correspond to the markings on the valve.
3. Spray the connector with Kontakt 61 (part no. 30 04 520). Plug in the connector and fit the rubber cap.

Ignition System > < Wastegate Solenoid|Specifications|Page 6652