9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-1194002.png)
4. Uncut the cable tie to the oxygen sensor and draw out the cables.
5. Remove the oxygen sensor from the turbo outlet pipe.
To fit
IMPORTANT: The oxygen sensor is sensitive to impact and jolting and must be handled with care. It is important that the connections between the
oxygen sensor and nipple are gas-tight.
1. Coat the oxygen sensor threads with Molycote 1000 (30 20 971) to prevent binding.
2. Fit the oxygen sensor.
Tightening torque 55 Nm (41 ft. lbs.)
IMPORTANT: Chemicals such as contact spray and grease must not come into contact with the oxygen sensor connectors.
3. Draw out the cable and plug in the connector.
