saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Starter - Does Not Crank Engine|Page 151 > < Control Module, SPA, Switch A (630A)|Page 141
Page 1
background image

Starter Cable: Customer Interest
Starter - Does Not Crank Engine

SERVICE INFORMATION

Bulletin Number: 331-2347

Date: April, 2002

Market: All

Starter Motor Does Not Work

Cars Affected:
Saab 9-5 M00-

Background

The nut of the starter motor's positive connection can loosen so that the contact surface oxidises. This causes poor contact and can result in the starter
motor not cranking.

The following action should be taken upon customer complaint.

Symptom description

Starter motor does not crank.

Parts Required

40-304 221 005 Universal oil (enough for approx. 200 cars)

Procedure

1.

Detach the negative cable from the battery.

2.

Detach the positive cable from the starter motor.

3.

Clean the starter motor contact surfaces, nut and positive cable connection. Use a brush and universal oil.

4.

Connect the positive cable to the starter motor.

Tightening torque 10 Nm (7 lbf ft)

Starter - Does Not Crank Engine|Page 151 > < Control Module, SPA, Switch A (630A)|Page 141