saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Electronic Brake Control Module|Testing and Inspection > < ABS With ESP and TCS|Page 600
Page 6
background image

Battery voltage (+15 circuit)
The +15-circuit power supply goes via fuse 26 (22a) to pin 15 on the control module. When the +15 voltage is applied to pin 15, the control module is
activated.

Diagnostics
If the supply drops below 9 V for at least 0.5 s, diagnostic trouble code C1532 will be generated, the ABS warning lamp will come on and the ABS
system will be disabled.

Electronic Brake Control Module|Testing and Inspection > < ABS With ESP and TCS|Page 600