saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Control Module Inputs|Page 10614 > < Control Module Inputs|Page 10612
Page 16
background image

The control module can be reused no more than two times after activation of a seat-belt tensioner and/or side airbag, i.e. the side airbags and seat-belt
tensioners can be triggered a total of three times before the control modules is considered unserviceable.

DTCs are generated for all activated airbags and seat-belt tensioners. The DTC for an activated front airbag cannot be cleared and the control module
must be changed.

Storage of diagnostic trouble codes

The SRS control module can store 24 DTCs in its memory.

5 DTCs are reserved for:

-

driver airbag activated

-

passenger airbag activated

-

seat-belt tensioner activated

-

side airbag, driver's side, activated

-

side airbag, passenger side, activated

There are two types of DTCs, active and historic. An active DTC indicates a fault that is currently in the system, while a historic DTC indicates a fault
that has occurred, but no longer remains in the system.

The DTCs are saved in chronologic order, with active DTCs receiving higher priority than historic. A historic DTC is saved for 250 ignition cycles
(ignition off-on).

Control Module Inputs|Page 10614 > < Control Module Inputs|Page 10612