saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear-Seat Belts, 4D|Page 10671 > < Rear-Seat Belts, 4D|Page 10669
Page 3
background image

15

Lift the strap guide off the backrest and remove it from the belt.

16

Cut away the foam padding slightly so that the strap guide's screws become accessible.

17

Remove the strap guide by undoing the screws.

18

Withdraw the strap guide and remove it from the belt

19

Withdraw the inertia reel and belt.

To fit

1

Fit the inertia reel and belt.

2

Mount the belt plate on the rear of the backrest, 4 screws.

3

Insert the belt through the guide and fit the strap guide in place. Insert the longer side first.

4

Fit the strap guide's screws.

Tightening torque: 22 Nm (16 lbf ft)

Rear-Seat Belts, 4D|Page 10671 > < Rear-Seat Belts, 4D|Page 10669