saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear-Seat Belts, 4D|Page 10681 > < Rear-Seat Belts, 4D|Page 10679
Page 8
background image

13

Pull off the back plate, secured with clips. Move the angled side of the trim out of its groove in order to extract the plate.

IMPORTANT
Take care to avoid breaking the corner.

14

Remove the belt plate, 4 screws, from the rear of the backrest.

15

Lift the strap guide off the backrest and remove it from the belt.

16

Cut away the foam padding slightly so that the strap guide's screws become accessible.

17

Remove the strap guide by undoing the screws.

18

Withdraw the strap guide and remove it from the belt

19

Withdraw the inertia reel and belt.

To fit

1

Fit the inertia reel and belt.

Rear-Seat Belts, 4D|Page 10681 > < Rear-Seat Belts, 4D|Page 10679