saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear-Seat Belts, 4D|Page 10691 > < Rear-Seat Belts, 4D|Page 10689
Page 18
background image

7. Remove the hinge pin at the centre joint.

IMPORTANT:  Do not touch the retaining bolts.

8. Undo the 60% backrest trim bracket (at the outer seatbelt anchor point).
9. Place the backrest in the upright position. Lift off the backrest from the left side bracket.

10. Move the 60% backrest towards the door so that the pin towards the centre joint comes out of its hole.
11. Lift out the backrest.
12. Remove the backrest lock's cover, 1 screw on the side plus clip (turned a 1/4 turn).

Rear-Seat Belts, 4D|Page 10691 > < Rear-Seat Belts, 4D|Page 10689