9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
WARNING:
-
All Saab 9-5 models are equipped as standard with the SRS, including belt tensioners.
-
Work in accordance with the safety and handling instructions in Group 8, Airbag (SRS), "Technical Description".
1. Fit the inertia reel and belt tensioner, 2 nuts and 1 screw.
Tightening torques: Inertia reel 45 Nm (33 lbf ft)
2. Reconnect the connector for the belt tensioner.
3. Draw the belt through the B-pillar trim and refit the strap guide.
4. Refit the B-pillar trim.
Check that the carpet and sill scuff plate are covered by the B-pillar trim.
5. Fit the door sealing strips around the B-pillar trim.
6. Attach the end fitting to the seat.
Check that the end fitting is correctly fitted by slackening the belt and pulling directly upwards with a force of 5 N. Check that the catch is visible
on the outside of the mounting.
7. Then check the following with the diagnostic tool:
Connect the diagnostic tool to the connector under the dashboard. Delete any diagnostic trouble codes.