saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Starter - Does Not Crank Engine|Page 8671 > < Starter - Does Not Crank Engine|Page 8669
Page 1
background image

Starter Motor: Service and Repair

Replacing The Starter Motor, 4-cylinder Engine

To remove

1. Remove the cover on the battery and the shield on the intake manifold.
2. Disconnect the negative battery cable.
3. Remove the starter motor's upper retaining bolt (18 mm).
4. Disconnect the starter motor connecting cables.
5. Raise the car.
6. Cut the strap around the solenoid.
7. Unscrew the starter motor's lower retaining nut.
8. Lower the starter motor and lift it out.

To fit

1. Clean the starter motor mounting surfaces and electrical contacts and apply Vaseline.

Starter - Does Not Crank Engine|Page 8671 > < Starter - Does Not Crank Engine|Page 8669