saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 9185 > < Procedures
Page 2
background image

5. Connect the cables to the airbag module.

6. Fit the module, the two screws. Make sure that the strip does not protrude over the edge. Fit the plugs into the screw holes.
7. Start the engine and check that the airbag warning lamp does not indicate a fault.

^

Carry out troubleshooting if the lamp indicates a fault in the airbag system.

8. Check the signal function.

Steering Wheel

Steering wheel

Warning:  Read before starting work.

To remove
1. Put the ignition in OFF position.
2. Turn the steering wheel to the straight-ahead position.
3. Detach the airbag module from the steering wheel, 2 screws and plugs.

Procedures|Page 9185 > < Procedures