saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Suspension > < Tie Rod End|Description and Operation|Page 9201
Page 2
background image

2. Bolt the track-rod end to the steering swivel member.

Tightening torque 35 Nm (26 ft. lbs.).

3. Tighten the track-rod end's locknut.

Tightening torque 70 Nm (55 ft. lbs.).

4. Fit the wheel.

Tightening torques
aluminium wheel 110 Nm (81 ft. lbs.)
steel wheel 50 Nm + 2 x 90°, max. 110 Nm (37 ft. lbs. + 2 x 90°, max. 81 ft. lbs.)
Lower the car to the floor.

5. Check the toe-in and adjust if required. Use Toe-in gauge 88 19 013.

Suspension > < Tie Rod End|Description and Operation|Page 9201