saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Bleeding the Clutch Hydraulic System In the Car|Page 7249 > < Bleeding the Clutch Hydraulic System In the Car|Page 7247
Page 4
background image

5. Hook the spring onto the clutch pedal.
6. Depress the pedal and pull out the push rod in the switch. Pull up the pedal again so that the switch is adjusted to the correct position.
7. Fit the lower section of the dashboard, data link connector and floor lighting.
8. Connect the supply hose to the reservoir.
9. Fit the ABS unit bracket.

10. Fit the ABS unit and plug in the connector.

Bleeding the Clutch Hydraulic System In the Car|Page 7249 > < Bleeding the Clutch Hydraulic System In the Car|Page 7247