saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Clutch Pedal and Pedal Bracket|Page 7271 > < Clutch Pedal and Pedal Bracket|Page 7269
Page 6
background image

12. Tighten the pedal bracket screws to the steering wheel member.
13. Fit the pedal switch and connect the cable.

Depress the pedal and pull out the pushrod in the switch. When the pedal is then released, the switch will be adjusted to the correct position. Check
by pulling back the pedal once by hand.

14. Fit the knee shield under the steering wheel.

15. Fit the dashboard.
16. (LHD): Set the clock and enter the radio code, if applicable.

Clutch Pedal and Pedal Bracket|Page 7271 > < Clutch Pedal and Pedal Bracket|Page 7269