saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Constant Velocity Joint > < Axle Shaft|Service and Repair|Page 7296
Page 6
background image

16. Fit the wheel. 

Tightening torque 110 Nm (80 ft. lbs.) 

IMPORTANT: The wheel must be suspended freely when tightening the wheel bolts

17. Lower the car to the floor.
18. Fit the upper engine cover.

19. Connect the negative lead to the battery and fit the battery cover.
20. Fill up with automatic transmission fluid to the correct level.
21. Set the clock and radio code if applicable.

Constant Velocity Joint > < Axle Shaft|Service and Repair|Page 7296