saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Changing Bushes In the Gear Lever Joint|Page 7402 > < Changing Bushes In the Gear Lever Joint|Page 7400
Page 1
background image

Shifter M/T: Service and Repair

Changing Bushes In the Gear Lever Joint

Changing Bushes In The Gear Lever Joint 

Change bushes when there is play in the joint.

1. Remove the selector rod.
2. Tap out the spacer sleeve using a drift.
3. Remove and change bushes.
4. Fit the spacer sleeve.
5. Fit the selector rod as described in.

Checking the Gear Lever Reverse Detent Function

Checking The Gear Lever Reverse Detent Function 

Changing Bushes In the Gear Lever Joint|Page 7402 > < Changing Bushes In the Gear Lever Joint|Page 7400