9-5 Sport Wagon (9600) L4-2.3L Turbo (B235) (2003)
/l4-2.3l_turbo_(b235)/Page-4024008.png)
24. Press the plastic guard down between the cutting wire and the panel to protect the interior equipment.
25. Crank with a lock handle so that the wire cuts through the glue joint. Move the plastic guard as the wire moves. Move the whimple little by little to
obtain a good angle. A transverse angle with the wire cuts best. If necessary, use the second whimple as support. If the wire seems to be coming
off, wait 10-15 seconds so that the wire can work itself into the glue joint.
26. When the wire begins to cut the upper part of the windscreen, fit the protective tool with suction cups between the cutting wire and metal roof to
protect the interior equipment. Move the whimple and protective tool little by little as the windscreen loosens.
