saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Antenna Cable, Radio|Page 10643
Page 2
background image

To fit

1. Plug the antenna cable into the antenna amplifier and fit the clips in the roof.
2. Carefully lift up the headlining and fit the two clips in the roof.

3. Refit the C-pillar trims and fasteners over the rear side windows.
4. Fit the roof covers over the rear side windows and refit the D-pillar trim.
5. Plug in the lighting and fit the rear roof cover.

IMPORTANT:  Be careful with connector (2). Exercise care when undoing the high frequency connector, Fuba GO-NOGO. Disconnection must be
performed correctly so as not to damage the connector. See Antenna amplifier (4D)

Antitheft and Alarm Systems > < Antenna Cable, Radio|Page 10643