saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder|Service and Repair|Page 12403 > < Trunk / Liftgate Lock Cylinder|Service and Repair|Page 12401
Page 4
background image

2. Hook on the lock rods to the driver.
3. Fit the inner trim by inserting the guide pin at the door pull and fastening with the clips at the edge of the window. Screw in the two door pull

screws. Fasten the remaining clips around the trim.

Trunk / Liftgate Lock Cylinder|Service and Repair|Page 12403 > < Trunk / Liftgate Lock Cylinder|Service and Repair|Page 12401