saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Headlining, 4D|Page 12590 > < Headlining, 4D|Page 12588
Page 6
background image

IMPORTANT:  Be careful not to crack the headlining.

1. When replacing the headlining, the rear roof light and wiring harness should be fitted.

Lift the headlining in through the front door on the passenger side.

2. Reconnect the connector on the top of the headlining.

Where applicable, reconnect the connector for the alarm system.

3. Raise the headlining at the rear and place it on the C-pillar trims.
4. Fit the headlining to the B-pillar trim and door sealing mouldings on the driver's side.
5. Pull the headlining forward so it is hanging from the roof console by the rear-view mirror.
6. Cars with sunroof:

Reattach the hooks at the sunroof.

7. Fit the headlining under the door sealing mouldings on the passenger side.

Headlining, 4D|Page 12590 > < Headlining, 4D|Page 12588