saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Roof Rack Frame|Service and Repair|Page 13186 > < Roof Rack Frame|Service and Repair|Page 13184
Page 5
background image

1. Fit the metal cover plate to the roof, if it was removed.
2. Check the seals round the screws and on the roof bar's retaining plates to make sure they are not damaged.
3. Position the roof bar and screw it in place.

Tightening torque: 20 Nm (14.7 lbf ft)

4. Push up the headlining and fit it around the door weather seal mouldings.
5. Fit the clip securing the rear edge of the roof and the cargo net lashing eyes.

Roof Rack Frame|Service and Repair|Page 13186 > < Roof Rack Frame|Service and Repair|Page 13184